Integriti Field GuideIndependent installation guide PDF guide

CHAPTER 02 / INSTALL

Check the server

  1. 1Check Windows and account rights
  2. 2Find the site size
  3. 3Check the PC parts
  4. 4Check .NET and the network
  5. 5Plan remote sites
STEP 4 OF 5

Check .NET and the network

  1. Install .NET 4.8 or later on the server and on every client.
  2. Keep the .NET version the same on the server and the clients.
  3. Open the TCP ports in the table.
  4. Check the separate needs of each optional integration.
PortConnection
TCP 44000Client to application server
TCP 4711Controller to controller server
Diagram of one site. The Integriti server PC runs the Application Server, the Controller Server, and SQL. It connects to a network switch. The Integriti controller connects through the switch to the Controller Server on TCP 4711. The client PC connects through the switch to the Application Server on TCP 44000. The example addresses are 192.168.1.10, 192.168.1.20, and 192.168.1.50. (opens full size in a new tab)
One site on a local network. The addresses are examples.Source: Drawn for this guide from the Hardware and Software Prerequisites (PDF page 7), the System Configuration Handbook (PDF pages 83 and 90), and the Cyber Security Hardening Guide (PDF pages 10-11). All addresses are examples.

.NET Windows software that the Integriti apps need.

TCP port A numbered path for network traffic.

Expected result

The .NET version and required network paths are known.

I need help with this step

For a client connection, check TCP 44000. For a controller connection, check TCP 4711.

If a step does not work, refer to the original documentation supplied with the software or contact support@innerrange.com.

Search the installer FAQ
Manual referencesS2 · Hardware and Software Prerequisites · PDF page 4, 7 (opens in a new tab)