Integriti Field GuideIndependent installation guide PDF guide

CHAPTER 08 / SET UP

Set up the site

  1. 1Check that the controller is free
  2. 2Follow the site and hardware instructions
  3. 3Release a controller from its old server
STEP 3 OF 3

Release a controller from its old server

Warning

This breaks the link to the old server. The old site can no longer use this controller.

Warning

A full default erases all programming. Do it only if Inner Range support tells you to. The method is in the ISC and IAC installation manuals, page 7.

  1. Use this step only if the old site no longer needs this controller.
  2. Back up the database on the old server.
  3. In System Designer on the old server, right-click the controller in the Navigation panel. Choose Export, then Delete.
  4. At the controller keypad, log in with the installer code.
  5. Open the communications task programming menu.
  6. Select the Integriti communications task.
  7. Change its state from Active to Idle.
  8. Delete the communications task.
  9. Enrol the controller in the new server.

Keypad keys

Log in (installer code 01 if unchanged)
[0], [1], [Ok]
Open the communications task menu
[Menu], [7], [3], [1]
Select the Integriti communications task
[Ok]
Change the state from Active to Idle
[9]
Delete the communications task
[◄], [Off], [Ok], [9]
Note

The controller can still hold programming from the old site. Choose the data sync option on purpose when you enrol. Prefer Controller Changes writes the records of the controller into the new server.

Note

The Integriti communications task is usually CT01. The keys are the same on the ISC and the IAC.

Communications task A setting in the controller that holds its connection to a server. The Integriti communications task connects the controller to the Integriti server.

Expected result

The Integriti communications task is gone from the controller. The controller can be enrolled in the new server.

I need help with this step

If the keypad menu does not match these keys, stop. Read the original documentation or contact support@innerrange.com.

If a step does not work, refer to the original documentation supplied with the software or contact support@innerrange.com.

Search the installer FAQ
Manual referencesS7 · Integriti CS Quick Start Guide, Revision 3 · PDF page 2, 14 (opens in a new tab)S5 · System Configuration Handbook · PDF page 90 (opens in a new tab)S4 · Manual - Integriti User-Operator Guide · PDF page 37 (opens in a new tab)S8 · Integriti Security Controller (ISC) Installation Manual, Revision 2.2 · PDF page 7 (opens in a new tab)S9 · Integriti/Infiniti Access Controller (IAC) Installation Manual, Revision 3.2 · PDF page 7 (opens in a new tab)